Acetal Copolymer - PTFE filled

MATERIAL DATA SHEET The information contained herein is typical and intended for REFERENCE USE ONLY. This information should NOT be used as a basis for design, manufacturing or quality assurance purposes. Please contact us for complete, manufacturer-approved material property data sheets. All values below are at 72°F (23°) unless otherwise noted.

---

Acetal Copolymer - PTFE Filled Specifications

Description

Acetal Copolymer - PTFE Filled is an outstanding bearing and wear material for use in both wet and dry environments. Acetal Copolymer - PTFE Filled is frequently used in place of traditional metal and plastic bearing materials when low friction, excellent wear properties, and good dimensional stability are required. The PTFE filler allows Acetal Copolymer to be used without additional lubricants in applications where grease and oil are undesirable. The white grade of Acetal Copolymer - PTFE Filled is FDA compliant for use in food processing machinery.

Applications

Bearings • Bushings • Slide pads • Gears

Advantages of Acetal Copolymer - PTFE Filled

Excellent wear properties in both wet and dry environments • Low friction • Low moisture absorption • Good chemical resistance • Good dimensional stability • High strength and stiffness • Easy to machine • FDA compliant (white only)

Manufacturing Capabilities

Rod: 1/4” to 8” diameter • Sheet: 1/4” to 6” thick

Color/Grades

Brown (standard) • White (FDA compliant)

Typical Properties of Acetal Copolymer - PTFE filled

	Units	ASTM Test	Result
Mechanical Properties
Flexural Modulus	psi	D790	320,000
Flexural Strength @yield	psi	D790	9,500
Izod Impact Strength Notched @73°F	ft•lbs/in	D256	0.90
Tensile Elongation @break	%	D638	12.0-15.0
Tensile Strength @yield	psi	D638	6,500
Thermal Properties
Heat Deflection Temp. @ 264 psi	°F	D648	210
Electrical Properties
Dielectric Strength	v/m	FED.T.M.ST.406BM4031	450,000
Tribological Properties
Coefficient of Friction - Dynamic	40 psi, 50 fpm	LNP #3	0.15
Coefficient of Friction - Static	40 psi	LNP #3	0.07
Wear Factor (K)	10-10in5-min/ftlb-hr	LNP #3	11
Other Properties
Specific Gravity	-	D792	1.50
Water Absorption @ 24 hrs	%	D570	0.15