Static-Dissipative Acrylonitrile-Butadiene-Styrene (SD-A)

MATERIAL DATA SHEET The information contained herein is typical and intended for REFERENCE USE ONLY. This information should NOT be used as a basis for design, manufacturing or quality assurance purposes. Please contact us for complete, manufacturer-approved material property data sheets. All values below are at 72°F (23°) unless otherwise noted.

---

Static-Dissipative Acrylonitrile-Butadiene-Styrene (SD-A) Specifications

Description

Non-carbon-filled anti-static material which has high impact strength, good tensile and flexural strength, and is easily machined. Available in natural or black, it can be easily thermoformed in thinner gauges, and is bondable.

Applications

Disk drive assembly fixtures • Semiconductor/electronic components • Electronic component transfer trays • Telecommunications hardware • Automotive equipment

Advantages of Conductive Acrylonitrile-Butadiene-Styrene (SD-A)

Good strength and stiffness • Cost effective • Easily machined • Good chemical resistance • Durable • Bondable

Manufacturing Capabilities

Rod: 1/8” to 4” diameter • Sheet: .030” to 4” thick • Film: .010” to .029” thick

Color/Grades

Natural (beige)

Typical Properties of Static-Dissipative Acrylonitrile-Butadiene-Styrene (SD-A)

	Units	ASTM Test	Result
Mechanical Properties
Tensile Strength @yeild	psi	D638	5,000
Tensile Elongation @break	%	D638	13.0
Flexural Strength	psi	D790	8,000
Flexural Modulus	psi	D790	260,000
Izod Impact Strength Notched	ft·lbs/in	D256	6.0
Izod Impact Strength Un-notched	ft·lbs/in	D256	no break
Hardness-Shore D	-	D2240	68
Thermal Properties
Heat Deflection Temp. @264 psi	°F	D648	160
Heat Deflection Temp. @66 psi	°F	D648	190
Flam. Rating-UL94	-	-	HB
Electrical Properties
Surface Resistivty dry	ohm/sq	D257	109 - 1011
Volume Resistivity dry	ohm/cm	D257	109 - 1011
Static Decay 15% RH	seconds	Mil-B-81705-B	<0.3
Other Properties
Specific Gravity	-	D792	1.03
Water Absorption @24 hours	%	D570	1.70