Conductive Acrylonitrile-Butadiene-Styrene (CN-P)

MATERIAL DATA SHEET The information contained herein is typical and intended for REFERENCE USE ONLY. This information should NOT be used as a basis for design, manufacturing or quality assurance purposes. Please contact us for complete, manufacturer-approved material property data sheets. All values below are at 72°F (23°) unless otherwise noted.

---

Conductive Acrylonitrile-Butadiene-Styrene (CN-P) Specifications

Description

Carbon-powder-filled conductive material with high strength and stiffness, and relatively high impact strength. This material is easily machined and fabricated into close tolerance finished parts.

Applications

Disk drive assembly fixtures • Semiconductor/electronic components • Electronic component transfer trays • Telecommunications hardware • Automotive equipment

Advantages of Conductive Acrylonitrile-Butadiene-Styrene (CN-P)

Good strength and stiffness • Cost effective • Easily machined • Good chemical resistance • Durable • Bondable

Manufacturing Capabilities

Rod: 1/8” to 4” diameter • Sheet: .030” to 4” thick • Film: .010” to .029” thick

Color/Grades

Black

Typical Properties of Conductive Acrylonitrile-Butadiene-Styrene (CN-P)

	Units	ASTM Test	Result
Mechanical Properties
Tensile Strength @yeild	psi	D638	4,000
Tensile Elongation @break	%	D638	11.0
Flexural Strength	psi	D790	7,200
Flexural Modulus	psi	D790	280,000
Izod Impact Strength Notched	ft·lbs/in	D256	1.0
Izod Impact Strength Un-notched	ft·lbs/in	D256	13.5
Hardness-Shore D	-	D2240	-
Thermal Properties
Heat Deflection Temp. @264 psi	°F	D648	185
Heat Deflection Temp. @66 psi	°F	D648	-
Flam. Rating-UL94	-	-	HB
Electrical Properties
Surface Resistivty dry	ohm/sq	D257	102 - 106
Volume Resistivity dry	ohm/cm	D257	102 - 106
Static Decay 15% RH	seconds	Mil-B-81705-B	<0.1
Other Properties
Specific Gravity	-	D792	1.03
Water Absorption @24 hours	%	D570	0.30